SAME-DAY SERVICE AVAILABLE:
A broken dryer or washer in the home is really inconvenient. You are too busy for trips to the laundromat. To avoid dirty laundry piling up, you need to call a local appliance repairman. When you want an affordable and reliable appliance repair company offering repair service the same day you call, contact us at Federal Way Appliance Repair.
Our experienced repairmen bring the tools, training and experience to the job of both common and complicated repairs on the initial service visit. We stock our vans with manufacturer parts for the major brands of dryers and washers, Goodman, Lennox, GE, LG, Kenmore, Bryant, Carrier, Sears, Armstrong, RCA and the rest!
When you get tired of the loud noise coming from your washer, call us to schedule a service call. Noises are the most common reason we come out to service washers. Usually this is a worn belt, broken pump motor, or bad bearings. We will fix on our first visit and the repairs will typically reduce the likelihood of more problems down the line!
WON’T TURN ON/AGITATE
When the washing machine does not turn on, make sure the machine is plugged in and the circuit breakers are not flipped off. Broken door latches, timer problems, and trouble with a thermal fuse all can keep a washer from turning on. Bad agitator cogs, drive belt, coupler, or transmission are all reasons a washer will not agitate. Call us for a same day service call and repairs.
A washer that does not spin has issues with the wax motor, motor coupling or door latch. Call us to schedule a same-day service call and we will get the washer spinning again on our first visit.
Call us when the washer overflows. The problem is usually the air dome tube, water level pressure switch, or the water inlet valve. We carry the parts and tools to fix these problems on all major brands of washers.
NO HOT/COLD WATER
When the washer does not have hot or cold water it can cause a variety of problems with the wash. This is caused by a broken temperature control switch or a problem with the inlet hose. Call us and fix the problem today.
Broken seals or bearings and worn belts are the typical reasons for the noise coming from your dryer. We fix lots of these problems as noise is the leading reason we make service calls for dryers.
NO HEAT/WON’T DRY
Your dryer needs to heat up to dry the clothes. When there is a broken high limit thermostat, heating element, or cycling thermostat the dryer will not heat up. Call for an appointment and our technician will diagnose the issue and fix the problem, all in the same day.
WON’T TURN ON/TUMBLE
Make sure your dryer is plugged in and the circuit breaker has not been tripped if the appliance will not turn on. The repairman may need to repair or replace the heating element, cycling thermostat or high limit thermostat to resolve this issue. Call us for an appointment today.
WON’T TURN OFF
If your dryer will not turn off give us a call. Usually this is broken timer or door switch which we can quickly fix and get your dryer back to normal function.
TIMER WON’T ADVANCE
The dryer timer is what advance through the steps in the drying cycle. When the timer does not advance, it usually means the cycling thermostat or timer motor is broken. We carry these parts for all major brands and will fix the issue the same day that you call.